Check if memory is installed correctly.Unable to process PCL print data due to insufficient print page buffer. Contact the Xerox Welcome Center.Īn error occurred due to insufficient memory for the PCL decomposer. There was a Kerberos server authentication protocol error. Windows 2000 or Windows 2003 Server, make sure the realm name is in upper Kerberos server address settings on the machine are correct. To the machine does not exist on the Kerberos server or the machine is notĬonnecting to the Kerberos server address. Check that the machine and the Kerberos server clocks have Kerberos server clocks have a time difference that exceeds the Kerberos serverĬlock skew value. This error was generated by the software. There was an SSLĪuthentication internal error. There was a LDAP server SSL authentication error. Setting in to avoid anĮrror, but the connected LDAP server security is not guaranteed. Set the LDAP server address on the machine to match theĪddress on the LDAP server SSL certificate. SSL] setting in to avoidĪn error, but the connected LDAP server security is not guaranteed. Change to a valid LDAP server SSL certificate. With SSL] setting in toĪvoid an error, but the connected LDAP server security is not guaranteed. Register the root certificate of the LDAP server SSL certificate on the machine. The machine does not trust the LDAP server’s SSL certificate. The SSL client certificate on the machine. The LDAP server requires an SSL client certificate. An SSL client certificateĬould not be acquired. Name and password used for the POP3 server are set correctly using Unable to log in to the POP3 server when transmitting e-mail. Unable to resolve the name of the POP3 server when e-mail was transmitted.Ĭheck if the POP3 server is set correctly using CentreWare Internet Services. Unable to resolve the name of the SMTP server when e-mail was transmitted.Ĭheck if the SMTP server is set correctly using CentreWare Internet Services.Īlso, check that the DNS server is set correctly. Check the SNTP server settings.Īn error occurred during writing data. Received a message from the SNTP server saying that it was not synchronized Check the network cableĬonnection and IP address of the SNTP server. Check the DNS configuration andĬonnection to the SNTP server was timed out. Unable to retrieve the IP address from DNS. The software feature does not function properly, because the fax card is not The software feature does not function properly, because the printer card is not Of the problem, contact the Xerox Welcome Center. If memory is installed correctly, and not being able to identify the cause Turn the power off and on.Ĭontact the Xerox Welcome Center if the problem persists.Īn error occurred due to insufficient memory. Contact the XeroxĪn error occurred on the software option settings. Cancel the staple feature or reset the documents with the same width.Īn error occurred in the document feeder. Stapling mixed size documents is available only for documents with the same Reduction/enlargement ratio, or change the paper size. The reduction/enlargement ratio exceeds the setting range when the scannedĭocument is enlarged/reduced to the specified paper size. Reduction/enlargement ratio to reduce the data size, or send the document in Place theĬompression of scanned data was unsuccessful. The tray, or change the paper type priority setting.Īn error occurred when reading the Gradation Adjustment Chart. Size in the tray selected at the tray selection. The paper size in the tray selected by auto tray switching, differs from the paper Incompatible features are selected in the document scan conditions. That the front and back sides have been reversed. Select a higher resolution or a largerĪn error occurred in the document scanner. The specified document area is too small. The setting of the double-sided Booklet Creation feature. No document was saved for the double-sided Booklet Creation feature. The job template could not be processed due to insufficient hard disk space.ĭelete unnecessary data from the hard disk. For some reason some Xerox printers come without the list of fault codes in the manual while some others do. Below is the list of Xerox printer fault codes.
0 Comments
Leave a Reply. |